You are watching: Honda accord front license plate bracket install
I just purchased a 2016 Accord EX and noticed the dealer mounted the front license plate parentheses off-center. To me that is really noticeable and an extremely frustrating. This is a caution to everyone in the industry for a 2016 Accord to take steps to avoid a negative installation of the front plate bracket. The Accord walk not have alignment dimples ~ above the bumper to make certain it is inserted correctly. I created a brief review report of the situation and attached it in situation anyone is interested. It contains pictures of how it was mounted on my car, and a simple method to make sure the dealer (or you) deserve to align that properly.
Bring it earlier to dealer and have them resolve it...not by just drilling new holes to move it over. Patch/replace former bumper; paint and install correctly. Dealer needs to know. Yours is most likely not an initial nor last v this situation. They higher kids to carry out this stuff and also fail to give them proper instructions and also cautions.
2016 LX cvt Lunar Silver/black interior. I desire to dice quietly in my sleep, choose Grandpa did. No screaming choose the people in his car...
Surprised that Honda doesn"t have actually a procedure to idiot proof something prefer this together they carry out for the Civic. A prime example of "irresponsible civilization are the problem". "No dimples there so I"m walk to just eyeball it rather of making an alignment mark." That"s just the mentality if you don"t obtain the right person who yes, really cares like Honda would intend them to care. It"s unfortunate and also you space entitled to a perfect car on delivery but there is no means around it to make it perfect now without someone poignant your car again which has actually the potential to cause more problems. Personally I would just have actually them drill some brand-new holes and call it a day.
It would certainly be really simple for The dealer to make a cardboard frame to use as a guide. Simply grab a large cardboard crate from components department, measure and cut, and then you have actually a perfect fit guide for the life of the generation(or half)Hopefully you don"t get a answer of "you didn"t notification it for a while". However if the dealer has actually let it go on because that a while lock will perhaps get protective quickly.
If it was off by a smaller amount I would certainly be OK v it. Mine is an extremely noticeable, to me at least. I am working with the dealer come get an additional bumper skin. I"m not sure I choose this 100%, due to the fact that it will certainly be differerent repaint that could not complement or last together long. That is being done at a shop the does every the rework because that the Marysville Accord plant, so maybe it will certainly be OK. If I simply redrill and also install the key centered, then if I sell the car or relocate to a various state, or Ohio transforms the law, I have a an extremely bad looking front bumper. One possibility is I witnessed a bracket on Amazon that has flexible slots that could let you move it closer come center. The Honda bracket is certainly not flexible without drilling brand-new holes.
If I simply redrill and install the key centered, then if I offer the auto or relocate to a various state, or Ohio alters the law, I have actually a very bad looking front bumper.
Why worry around what can happen? If you move to one more state, attend to it then. If you sell it, that"s the buyer"s problem, if they also notice. Lock won"t change the law.I imagine the existing holes will certainly be extended by the plate once it is in it"s intended spot. If that"s the case, simply drill brand-new holes and also be done through it.
Bring it ago to dealer and also have them deal with it...not by simply drilling new holes to move it over. Patch/replace front bumper; paint and also install correctly. Dealer demands to know. Her is most likely not first nor last with this situation. Lock higher kids to perform this stuff and fail to offer them appropriate instructions and also cautions.
2017 Toyota Highlander XLE. Yeah, so call me a traitor!!2013 Accord Sedan EX-L Nav., Basque Red Pearl II; 155,000+ miles and also still loving it.
If it was off by a smaller amount I would be OK with it. Mine is really noticeable, to me at least. Ns am working through the dealer come get one more bumper skin. I"m not certain I favor this 100%, due to the fact that it will certainly be differerent paint that could not match or last as long. It is being excellent at a shop the does all the rework because that the Marysville Accord plant, so maybe it will be OK. If I simply redrill and install the bowl centered, then if I sell the auto or relocate to a different state, or Ohio transforms the law, I have a really bad looking former bumper. One opportunity is I saw a parentheses on Amazon the has adjustable slots that could let you move it closer to center. The Honda clip is certainly not adjustable without drilling brand-new holes.
Curious exactly how the fix went ~ above the holes? I simply noticed the bowl bracket to be not centered on my car when ns went to put the plates on. Not certain if my dealer is walking to do anything as they said I could carry it in to just to have another collection of feet drilled right into the bumper. I actually took turn off the bracket and also centered to whereby it must be and also the clip wouldn"t even cover among the holes!I ordered the bracket on Amazon you are talking around so check out if that will deal with it. Thought around getting bumper plugs but even those would certainly not be centered=(
I just purchased a 2016 Accord EX and also noticed the dealer mounted the front patent plate parentheses off-center. Come me the is really noticeable and very frustrating. This is a fist to anyone in the market for a 2016 Accord come take steps to protect against a poor installation of the former plate bracket. The Accord walk not have actually alignment dimples top top the bumper to make certain it is placed correctly. I composed a brief review report the the situation and attached that in instance anyone is interested. It contains pictures of exactly how it was mounted on mine car, and a simple means to make certain the dealer (or you) can align that properly.
Surprised that Honda doesn"t have a procedure to you are fool proof something like this together they do for the Civic. A prime example of "irresponsible people are the problem". "No dimples over there so I"m going to simply eyeball it instead of make an alignment mark." That"s just the mentality if friend don"t get the right person who really cares prefer Honda would suppose them come care. It"s unfortunate and you are entitled to a perfect auto on delivery yet there is no way around it to do it perfect currently without someone touching your auto again which has the potential come cause an ext problems. Personally I would certainly just have actually them drill some new holes and also call that a day.
If it was off through a smaller sized amount I would be OK v it. Mine is very noticeable, to me in ~ least. Ns am working v the dealer to get another bumper skin. I"m not certain I like this 100%, since it will be differerent repaint that can not match or last together long. That is being excellent at a shop the does all the rework because that the Marysville Accord plant, so probably it will be OK. If I just redrill and install the key centered, climate if I market the auto or move to a various state, or Ohio transforms the law, I have a very bad looking front bumper. One possibility is I witnessed a clip on Amazon that has adjustable slots that might let you relocate it closer come center. The Honda parentheses is absolutely not flexible without drilling new holes.
OP, simply letting girlfriend know, there are some human being (mostly idiots and also ricers) the puts their front number plate totally to the appropriate or come the left, and also then there are civilization that favor to it is in normal and have that in the middle. Together for me, as I stayed in PA and FL, both states just use the back, whereas in Arizona, California, and Iowa, they need both front and back. It doesn"t matter for me, since mine has actually the holes and line up and still has actually the bottom part of the bracket in the center. If this bothers you, just look at those idiots who has actually their number bowl a complete side that the car and laugh at them if that makes you feeling better.
Mine: 2017 Acura MDX w/ tech FWD-- 74k (BCP) -- everyday Driver; 2022 Acura MDX Type-STBD Tesla Cybertruck Tri-MotorParents: 2019 Nissan Rogue SV w/ Prem Pack- 16k (BSM)Gone: 99 Accord LX, 04 Elantra, 05 Odyssey, 16 Rogue, 18 Kicks
This is not a brand-new problem...the two optimal rear patent plate holes on my 6th gen to be drilled at various angles. Renders taking the patent plate off and on much an ext painful 보다 it needs to be...Sent from mine SM-G920V using Tapatalk
Selene: 1999 Honda Accord LX Sedan 2.3 F23A4 182K Flamenco black color PearlAtreyu: 1989 Honda Prelude Si Coupe 2.0 B20A5 4WS 106k Granada black Pearl
I don"t gain why they changed it. Mine 7th gen key bracket was attached under the lip of the bumper into pre-drilled and tapped holes. For this reason if you removed the parentheses there to be no visible holes. I can"t think they drill holes in the confront of the bumper. That would certainly chap my hide.
92 EX Sedan auto (RBM) - offered after 12 year (140k miles)03 EX V6 Sedan auto (NBP, climate Ford Blue) - traded in ~ 13 years (135k miles)16 EX I4 CVT with sensing (KCM) - 74,000 miles so farHurricane Ida was a bitch.
My old OEM front bumper had actually holes drilled in the former of it for the NJ plate (where that was initially bought). There"s actually a level spot top top the bumper because that mounting however I don"t think castle come tapped from the factory. My brand-new aftermarket bumper did not have taps or marks because that drilling. And I agree. Ns don"t get why they don"t attach brackets like that to the underside.
Selene: 1999 Honda Accord LX Sedan 2.3 F23A4 182K Flamenco black PearlAtreyu: 1989 Honda Prelude Si Coupe 2.0 B20A5 4WS 106k Granada black Pearl
And of course, mines like this too. Didn"t notification it until I looked at it head on. In fact, lock didn"t also put ~ above the former bracket. They simply screwed my patent plate directly on to the bumper.
I don"t acquire why they changed it. My 7th gen key bracket to be attached under the lip of the bumper right into pre-drilled and tapped holes. So if you gotten rid of the bracket there to be no visible holes. I can"t think they drill feet in the challenge of the bumper. That would chap mine hide.
Cheap. They conserve money. The is why this toy cars we buy space so inexpensive.What is so difficult to understand?
This is why i told my dealer no to install the front plate bracket, just throw that in the trunk. I understand most are currently installed when you purchase it. Ns just obtained lucky.
If the dealership had installed the bracket, understanding Louisiana doesn"t need front plates, I would certainly have had actually to go on to the following dealership. Few of them will certainly install the front brackets, just so they can put among their dealership name plates on. Happy for me, and Tiger Honda, they don"t.
92 EX Sedan auto (RBM) - marketed after 12 year (140k miles)03 EX V6 Sedan auto (NBP, climate Ford Blue) - traded in ~ 13 years (135k miles)16 EX I4 CVT through sensing (KCM) - 74,000 mile so farHurricane Ida was a bitch.
Mine is not centered as well. IMO nothing precious complaining about. I don"t think anyone else will ever before notice.
2016 Accord sport 6MT modern Steel Metallic 46,000 miles as of October 1, 2021. Mods: aFe agree dry S dashboard filter, 15% tint, sports grille (Ebay replica), development 22mm rear guide bar, Ultra gyeongju front strut bar, Eibach pro Kit
This is an enlarge thread, you might not receive a response, and could be reviving an old thread. Please think about creating a brand-new thread.
See more: Please Give Me Four Examples Of Diction In To Kill A Mockingbird Essay
Drive Accord forum, a neighborhood where Honda Accord owners can talk about reviews, service, parts, and share mods.
The 8th GenerationThe 7th GenerationThe nine GenerationAudio, electronics & LightingThe 10th Generation
aramuseum.org is an independent Honda enthusiast website owned and also operated through VerticalScope Inc. Content on aramuseum.org is produced by that is users. aramuseum.org is not in any way affiliated through Honda engine Company