If you’re wondering whether or not you can apply oil-based repaint over latex, it really isn’t a clever decision, but it is possible. The reason professionals advise against doing this is due to the fact that latex paint is flexible in nature, and also as a result, oil-based paints won’t correctly adhere to them.

You are watching: Can you spray paint over latex paint


If the is no done properly, it provides a normal paint job take much longer.

However, if you sand the surface and apply a sealing coat such as primer between the various layers, friend can gain by using oil-based paint over latex. Preparation is key. come successfully use oil-based paint over latex, follow the procedures below:

Step 1: Sand the surface

As formerly mentioned, latex is flexible in nature. Together a result, oil-based paint won’t correctly adhere to latex uneven you sand the surface and add primer between each of the layers. Begin by equipping yourself v a piece of P80 grit sandpaper and try to eliminate as much of the latex native the surface.

You can likewise use a sanding block. By removed the latex from the surface, the oil-based repaint will adhere much much better than if the latex to be left on. Make certain you sand the surface ar down until you obtain a actual matte look.

Step 2: Sand a little more

You’ll currently want usage 150 grit sandpaper and also sand until you obtain a surface ar that’s extremely smooth. After the surface has been totally sanded, wipe away the dust left behind v a damp towel or a clean cloth and let the surface to completely dry.

Step 3: Mask the area

Using a top quality masking tape, you’ll desire to mask anything girlfriend don’t desire accidentally painted. This can include things like the edges of adjoining walls, the edges of your cabinets, the edge of a irradiate switch, and so on. Masking help you gain that really clean, spicy look as soon as you’re finished painting and everything is fully dried.

Step 4: apply your primer

You have actually the selection between a water-based or acrylic primer. Every of this primers work well and have their pros and also cons. Both water-based and acrylic primers develop the perfect isolating surface. After girlfriend have applied the primer, and it’s completely dried, you’ll desire to walk ahead and also apply a second coat. It’s necessary to make sure you extended every solitary piece the latex possible.

Step 5: apply top coat

You’ll require a container of oil-based peak coat. This deserve to be to buy at many home advancement stores. After friend have used this solution, offer it enough time to dry, and also if require be, apply another coat for exceptional coverage.

Step 6: remove all the masking tape

It’s finest to eliminate all the masking tape prior to the paint fully dries. Removed the masking ~ the repaint has completely dried can cause the paint to tear, break, or chip.

Can you paint latex over oil-based paint?

Now that you recognize how apply oil-based repaint to latex, the question remains. Can you paint latex over oil-based paint? The price is yes, yet the thing you haver to remember is, when you apply latex over an oil-based paint, the only way to eliminate it is to sand the off. The can end up being quite a nightmare, so make certain you get it right the an initial time.

If you execute decide to use latex end an oil-based paint, you’ll likewise want to make sure you sand out any type of glossy locations of the surface, and make sure you usage 100% acrylic latex. It’s also important to keep in mind that the more you sand the surfaces, the better the acrylic paint will stick come them. To efficiently paint latex end oil-based paint:

Step 1: Sand the surface

To for sure the surface ar is totally sanded, and make certain you don’t see any type of sort the shine. You’ll desire to see more of a matte surface. This sanding should be done with a 150 grit paper.

Step 2: Mask the neighboring area

To make certain you gain sharp, clean-cut edges, mask the surrounding area v a top quality masking tape. Eliminate the masking tape once you’re done painting and the repaint is quiet moist. Like mentioned above, remove the masking tape when the repaint has completely dried deserve to chip, rip, or rest the repaint off.

Step 3: use latex ‘conversion’ inside wall paint

Once the surface has been completely sanded, you’ll desire to use a layer of latex ‘conversion’ inside wall paint. Make sure you give it enough time come dry and also you sheathe all locations of the surface ar you’re painting.

See more: Maria Boy In The Striped Pajamas : Character List, The Boy In The Striped Pajamas Chapters 5

Step 4: use your oil-based paint

Lastly, apply your oil-based paint and also let it dry. Once the latex ‘conversion’ primer and also your oil-based repaint mix, they allow your oil-based paint to adhere with no issues.