home Sewing Embroidery CS80 CS8060 Don"t watch your design number? Click below to get in it and find associated answers.

Be certain that you room using the suggested bobbin for her machine; otherwise your bobbin winder will not wind the fail correctly. Monitor the steps listed below to wind a bobbin.

You are watching: Brother sewing machine bobbin winder not spinning


1. Revolve the strength on the machine.

2. Open the fail winder cover at the optimal on the best side the the sewing machine.

3. Swing increase the bobbin subject spool pin. Move the bobbin thread spool pen up as much as possible.


1-Bobbin object spool pin

4. Place the bobbin on the fail winder column so that the feather on the column fits into the notch in the bobbin.



2-Bobbin winder obelisk spring

5. Slide the failure winder shaft to the right.


NOTE: If the correct dimension bobbin is not used at this time; once the failure winder is engaged; the bobbin winder will make a normal noise and not wind the fail correctly.

6. Location the spool of thread for the bobbin top top the bobbin object spool pin.

7. On slide the spool lid onto the bobbin object spool pin.

NOTE: If making use of thread that winds turn off quickly, such as nylon or metallic thread, ar the spool net over the spool prior to placing the spool of thread onto the spool pin.

8. Pull out part thread, and also then thread the thread overview for the failure winding. Organize the thread through both hands, and also then securely happen the object as far as possible into the two slits in the subject guide.


1-Thread overview for bobbin winding

2-Two slits

9. While making use of your left hand to host the finish of the thread the wraps approximately the thread overview for bobbin winding, use your right hand to wind the cost-free end of the thread clockwise about the bobbin 5 or six times.


10. Traction the thread come the right and pass it with the cleft in the bobbin winder seat.

See more: Meaning Of Emma In The Bible, Emma: Name Meaning, Origin, Popularity


1-Slit in the bobbin winder seat (with integrated cutter)

- If the problem persists after following these steps, please contact our technical assistance through Live conversation or questioning a question at the height of the page.