By trial and also error, ns have found a good way to remove the door dashboard from a 2002 Ford traveler (and other comparable years).

You are watching: 2002 ford explorer rear hatch panel removal

The first two steps deserve to be excellent in one of two people order, but doing castle in the order ns have detailed below will stop damage and also scratches come the paneling.

Step 1 Removing panel #1

First, the tiny panel behind the door handle/lock demands to it is in removed. There space two clips situated on the forward section of the panel; wedge a flathead driver behind this portion of the panel and also pry the loose. As soon as it is loose, you can use her fingers to pull it the remainder of the means out. Law this step first makes removed the next piece a lot easier.

Step 2 Removing panel #2

Secondly, the window mechanism. At this point, v the paneling behind the door handle removed, it must be simpler to eliminate the window mechanism dashboard (Panel #1 to be holding dashboard #2 in place). Eliminate Panel #2 by grabbing it v your fingers and pulling up and forward. If it can"t it is in pulled with your fingers, wedge a flathead screwdriver behind the panel and also pry it outward and pull up and forward. The main clip that requirements to be freed is ~ above the middle inner portion of the panel. The various other two clips are little clips ~ above the external of the panel.

TipThere is a item of plastic top top the ago end of the panel that slides beneath the armrest—this is the reason you should slide that forward rather of just lifting it up. Doing it in this way prevents damage to the paneling.

Step 3 Disconnecting the Wires

To disconnect the wires, simply location a flathead screwdriver just beneath the tab the holds the clips in place. Simply push in and pry up. The wire clips should pop free. Set the window mechanism panel off to the side.

Step 4 removed the whole Panel

To eliminate the whole panel and also expose the speakers and door handle, there space three 7/16" hex screws that have to be gotten rid of (a 7/16" socket and also extension worked just fine because that me). The an initial screw is behind the home window mechanism panel (this is the one that calls for the extension). Be certain to take the screw with your fingers once it is virtually out to prevent dropping it behind the panel. The last 2 screws are at the bottom the the door panel and are easy enough to remove. As soon as complete, background upward ~ above the door panel and pull outward. Currently you room done.

TipThe ingredient behind the paneling is acoustic shielding to stop your door panelings native rattling at high speed or with really larger speakers—try no to rip it. If you need to take it off to get to the widow motor, or if you"ve ripped it, you have the right to pick up new stuff at any type of electronics store that sells automobile audio stuff.

Step 5 Reinstalling the Panel

Reverse every steps detailed above come reinstall the panel. Describe the pictures listed below if over there is any confusion.

See more: What Is Thank You In Arabic In 13 Ways, Top 5 Ways To Say Thank You In Arabic!



(1) great view of all the clips ~ above this panel. (3) Screws #2 and also #3. (4) note the piece of plastic the slides under the armrest. (5) keep in mind where the screwdriver is located to pry the end the electrical clip. (6) keep in mind the white piece at the ago (Screw #1).

Want to grasp Microsoft Excel and also take your work-from-home job prospects come the next level? Jump-start her career through our Premium A-to-Z Microsoft Excel training Bundle native the new Gadget hacks Shop and get lifetime access to much more than 40 hours of basic to progressed instruction top top functions, formula, tools, and also more.