Here"s a an easy job that can increase the life of your automatic transmission. So store the cash in her pocket and also the truck on the road.

You are watching: 2001 dodge ram 1500 transmission fluid change


This article applies to the second Generation Dodge lamb (1994-2001).

With regard to auto maintenance, changing the automatic transmission fluid and filter is regularly overlooked. If your ram is overdue, right here is a good DIY task that will save some money and also increase the life of her truck. Girlfriend only require a couple of basic tools, and it can be done in one afternoon in the comfort of your own garage.

*

Materials NeededLarge oil record panRatchet and 1/2" socketT20 Torx socketBrake cleanerRTV sealantShop ragsATF+4 fluid

Step 1 – eliminate the oil pan

The most complicated part that this task is the an initial step. Uneven the engine oil pan, the infection doesn"t have actually a drainpipe plug, definition things can gain a bit messy. Put some cardboard and also a large drain pan under the transmission, and start by simply cracking every its 1/2" bolts loose. In plenty of cases, this is sufficient for the oil to begin seeping out on every sides the the transmission pan, however you want to lug one next of the down an initial to control the flow of oil right into the drain pan. So eliminate the bolts native one side first, and also then one-by-one toward the other side.

Hold the infection pan up with one hand to avoid the oil from leaking everywhere. When the oil has completely drained, eliminate the bolts and set the transmission pan down.

*
Figure 1. Let the oil drain out that one side first.

Step 2 – Clean and also inspect the transmission

Leave the drain pan and also cardboard in place, and let the transmission proceed to drip when you room cleaning it.

In the edge of the pan there is a magnet that collects metal shavings and debris, for this reason they cannot be sucked into the valve bodies and cause potential damage. It"s regular for over there to be some material right here as the clutches wear, however too much can indicate a problem, leaving girlfriend to business your infection in the close to future. Usage rags and brake cleaner to wipe every one of the old oil and also debris indigenous the pan.

If you are installing one aftermarket drain plug, now is the moment to perform it. Follow the indict on the package, and make sure you remove all metal shavings before re-installing the pan.

*
Figure 2. The ring roughly the magnet is every debris.

Step 3 – replace the filter

There space two T20 torx bolts stop the filter in place. Remove the bolts, eliminate the filter, and pour the oil into your drain pan. Set these components aside and also then install the new transmission filter, making sure it"s oriented correctly.

If her pan to be sealed v RTV sealant, now is a an excellent time to scrape it all away come prepare for the transmission pan to be re-sealed.

*
figure 3. The two big transmission pan holes home the Torx bolts.

Step 4 – Re-install the infection pan

If you are using RTV sealant, use a slim coating ~ above the gasket and also hold the pan in place. Through your other hand, subject in all of the bolts till they are finger tight. In a crisscross sample torque the bolts to 12 ft-lbs.

Now, start pouring in brand-new ATF+4 liquid into the transmission. Depending on how lot was drained out and how much remained in the oil cooler, friend will require to add between five and eight quarts; begin small, and also check the oil level together you are pouring. Always check the level through the engine running and with transmission in neutral. Once it"s in ~ the ideal level as suggested on the dipstick, journey the van around and also top turn off the fluid as needed.

See more: Watch Bastard Out Of Carolina Online Free Online, Watch Bastard Out Of Carolina For Free Online

*
Figure 4. Torque the bolts in a crisscross pattern to minimize any type of chances of leaking.

Featured Video: transmission Fluid/Filter Change