From: atmosphere-standard (atm) atmosphere-technical (at) bar (bar) decibar (dbar) millibar (mbar) barye (cgs unit) (barye) centimeter of mercury (cmHg) cm of water (4 °C) (cmH20) ft the mercury (conv.) (ftHg) ft of water (39.2 °F) (ftH20) in that mercury (conv.) (inHg) in that water (39.2 °F) (inH20) kg-force per mm² (kgf/mm²) kip every in² (kip/in²) mm that mercury (mmHg) mm the water (3.98 °C) (mmH20) pascal (Pa) hectopascal (hPa) kilopascal (kPa) megapascal (MPa) gigapascal (GPa) lb per yd² (lb/yd²) lb per ft² (lb/ft²) lb per in² (lb/in² or psi) poundal every ft² (pdl/ft²) brief ton every ft² (sh tn/ft²) torr (torr)


You are watching: 14.7 psi to inches of water

To: atmosphere-standard (atm) atmosphere-technical (at) bar (bar) decibar (dbar) millibar (mbar) barye (cgs unit) (barye) centimeter of mercury (cmHg) centimeter of water (4 °C) (cmH20) ft that mercury (conv.) (ftHg) ft that water (39.2 °F) (ftH20) in of mercury (conv.) (inHg) in the water (39.2 °F) (inH20) kg-force per mm² (kgf/mm²) kip every in² (kip/in²) mm the mercury (mmHg) mm the water (3.98 °C) (mmH20) pascal (Pa) hectopascal (hPa) kilopascal (kPa) megapascal (MPa) gigapascal (GPa) pound per yd² (lb/yd²) lb per ft² (lb/ft²) lb per in² (lb/in² or psi) poundal every ft² (pdl/ft²) short ton per ft² (sh tn/ft²) torr (torr)
Answer:
Send me her comments.
Get a Widget for this Calculator
© aramuseum.org
Share this Calculator & Page
*



See more: What Two Levels Of Classification Make Up The Scientific Name

*

Calculator Use

Pressure is a scalar top quality reflecting how force acts upon a surface.

p = F/A

Where ns is equal to pressure, F is the typical force and also A is area. Since pressure is obtained from force and also area, countless units for pressure directly relate force to area. Some space obvious, such together pounds every square inch, however even the SI typical Pascal is in reality an expression that one Newton per square meter.

How to transform Units that Pressure

Conversions room performed by making use of a conversion factor.By learning the conversion factor, converting between units can become a an easy multiplication problem:

S * C = E

Where S is our starting value, C is ours conversion factor, and E is our finish converted result.

To simply transform from any kind of unit into pascals, because that example, indigenous 5 bar, simply multiply by the conversion worth in the right pillar in the table below.

5 bar * 100000 < (Pa) / (bar) >= 500000 Pa

To convert from Pa right into units in the left obelisk divide by the value in the right tower or, main point by the reciprocal, 1/x.

500000 Pa / 100000 < (Pa) / (bar) > = 5 bar

To convert amongst any systems in the left column, say from A to B, you deserve to multiply by the factor for A to convert A right into Pascals then divide by the variable for B to convert out of Pascals. Or, you can find the solitary factor you need by splitting the A element by the B factor.

For example, to transform from bar come pounds per square inch you would certainly multiply through 100000then division by 6894.757. Or, main point by 100000/6894.757 = 14.503774. So, to transform directly native bar to pounds every square inch, you multiply by 14.503774.